T761 And T781 Operating Instructions - Asko T701 Use And Care Manual

T761 T761 T761 AND T761 T761 AND AND AND T781 OPERA AND T781 OPERA T781 OPERA T781 OPERATING INSTR T781 OPERA
THE CONTROL P THE CONTR THE CONTR THE CONTR THE CONTR OL P OL PANEL OL P OL P
Power Button
Press to turn on power
to the machine.
Power Indicator Light
Glows when the power
is turned on.
Start Button
Press to start
a program.
POWER BUTTON POWER BUTTON POWER BUTTON
POWER BUTTON POWER BUTTON
The Power button turns the power to the machine on
and off. When the power is on, the power indicator light
glows red. The power must be on before you can set
the programs or start the machine.
ST ST AR AR T BUTT T BUTT ON ON
ST STAR ST ART BUTT AR T BUTT T BUTTON ON ON
Once you have selected a program (P1–P4), press this
button to start the dryer. If you open the door during a
program, the dryer will stop tumbling automatically. The
dryer will remember where in the program it stopped.
To continue the program, close the door and press Start.
UNDERST UNDERST UNDERST UNDERST UNDERSTANDING ANDING ANDING ANDING THE L ANDING
The LCD window is easy to read and understand. The
illustration below explains each item on the LCD window. The
Program
When you press the Power
button, the display toggles
between the program numbers
and the wash program names,
(e.g., Extra Dry, Dry, etc.)
Preset Programs
Displays the program that
is selected/running.
TING INSTR TING INSTR TING INSTRUCTIONS TING INSTR
ANEL ANEL ANEL ANEL
Preset Programs
Press one of these buttons
to select a program.
Stop Button
Press to stop
a program.
THE L THE L THE L THE LCD CD WINDO CD CD CD WINDO WINDO WINDOW W W W W WINDO
Start
Indicates that you pressed Start
and the program is running.
UCTIONS UCTIONS UCTIONS UCTIONS
LCD Window
Displays the program, temperature
settings, and program run time.
Program Selection Controls
These buttons allow you to customize the
preset program settings, such as temperature
settings, turning the buzzer off, setting delay
start time, etc.
STOP BUTTON STOP BUTTON STOP BUTTON
STOP BUTTON STOP BUTTON
You can interrupt a program by pressing Stop for three
seconds. If you stop the dryer this way, it cancels the
program in progress. You will have to select a new
program and press Start to restart the dryer.
LCD window also displays the menus and options available
when you customize the preset programs (see page 14).
Program Time
When you start a program, the
total time the program runs is
displayed.
progresses, the time remaining
displays.
toggles between minutes (e.g.,
23) and hours (e.g., 1h).
Stop
Indicates that the program has
ended or that you pressed Stop.
As the program
The program time
Page 13