Hardware Monitoring - Alcatel-Lucent OMNISWITCH 6800 Hardware User's Manual

Availability Features

Hardware Monitoring

Automatic Monitoring
Automatic monitoring refers to the switch's built-in sensors that automatically monitor operations. If an
error is detected (e.g., over-threshold temperature), the switch immediately sends a trap to the user. The
trap is displayed on the console in the form of a text error message. (In the case of an over-threshold
temperature condition, the chassis displays an amber TMP LED in addition to sending a trap.)
LEDs
LEDs, which provide visual status information, are provided on the chassis front panel. LEDs are used to
indicate conditions such as hardware and software status, temperature errors, link integrity, data flow, etc.
For detailed LED descriptions, refer to
Components."
User-Driven Monitoring
User-driven hardware monitoring refers to CLI commands that are entered by the user in order to access
the current status of hardware components. The user enters "show" commands that output information to
the console. Monitoring information for chassis components such as the optional back up power supply,
chassis temperature sensor, and chassis fans is provided in
and Hardware Components."
CLI Reference Guide.
page 1-6
Chapter 2, "OmniSwitch 6800 Series Chassis and Hardware
Show commands for all features are described in detail in the OmniSwitch
OmniSwitch 6800 Series Hardware Users Guide
OmniSwitch 6800 Series
Chapter 2, "OmniSwitch 6800 Series Chassis
June 2007