Receiving An Ir File - AMX IREDIT V1.2 Instruction Manual

Receiving An IR File

You can transfer a preexisting IR file from either an Axcess or NetLinx Master directly into IREdit.
All property information except Notes is received from a NetLinx Master and no
property information is received from an Axcess Master.
1. First select a user database in the Navigator window. If you do not have a user database you
must create one.
2. Select Tools > Receive. IREdit uses the settings you established in Communications Settings
and opens the Receive IR Wizard dialog.
3. Click Next to proceed to the next screen.
4. Confirm the information in the Device field.
5. Enter the Device, Port and System number.
6. Click Next. IREdit will then request the IR data from the targeted device.
Place a check next to Please take me to the advanced screen to proceed to the final
screen of the wizard after a successful transfer.
7. Click Next when the wizard reads File transfer complete.
8. Enter the name of the Manufacturer or select from the list and click Next.
9. Enter the name of the Category or select from the list and click Next.
10. Enter the name of the Hand Control Model and click Next.
11. Enter the name of the Model and click Next.
12. Confirm all information listed on the Finished screen
13. Click Finish.
IREdit
Basic Operations
33