Actuate Ir Dialog; Actuating An Ir Function - AMX IREDIT V1.2 Instruction Manual

Actuate IR Dialog

Select Tools > Actuate to open the Actuate IR Dialog.
The Channel section contains a scrolling list, select a channel to test.
The Toggle section manually actuates from OFF to ON.
The Pulse section sets the actuate to pulse OFF and ON at a set interval.
Click the Close button to end the Actuate session.

Actuating An IR Function

You can select a downloaded IR function and then actuate it at the master to confirm a successful
download.
FIG. 21 Actuating An IR Dialog
1. After you have downloaded the IR file to the master, select one of the functions to actuate.
2. Select Tools > Actuate. This will open the Actuate IR dialog.
3. Confirm all information listed in the Device section is correct.
IREdit
The connection status is indicated in the Device section is the connection status. Specify
Device, Port and System address information in the text fields in this section
Click the Off button to turn on the corresponding LED at the master.
Click Pulse to cause the corresponding LED to flash.
Pulse interval time field (range is 1 to 100 in tenths of a second).
Device
Port
Basic Operations
35