Table of Contents
Advertisement
INSTALLATION OF RADAR ANTENNA
Mount the antenna to the vehicle such that the ANTENNA
window is facing the road surface, sky, right or left of the
vehicle, and the reflector has an unobstructed view of the
road ahead.
This side facing
forward traffic
Antenna window
Signal
Radar antenna mounted(vertical) with 45
Mounted in this position, radar signals are reflected into the
ANTENNA window.
Mounting the Temperature Probe
Find a location that is far enough away from the engine and
radiator heat but still in the airflow for the vehicle. Mounting
the Probe too close to these heat areas will give a false high
temperature.
• Attach the mountable tie wrap (supplied) to the
Temperature Probe as shown.
• Mark location for Probe, then drill a hole using a 7/64" drill
bit. Attach Probe with tie wrap in the correct orientation
using the #6 x 3/4 screws.
NOTE: Mount the Probe so that there is space between the
Probe and the mounting area.
Do not mount Probe directly to metal area.
Temperature
Probe
º Re flector
.
Mountable Tie Wrap
Probe Cable
Mounting Location
11
Advertisement
Table of Contents
