Table of Contents
Advertisement
INST ALLA TION OF LRM-5
Installing the LRM-5
Before using, attach the suction cup and rubber bumpers (2) to
the metal bracket. If necessary, you may bend the metal bracket
in order to position the LRM-5 correctly (3-lens array facing
forward, single lens facing behind.)
LRM-5 mounted with windshield bracket.
Using Hook & Loop Fasteners, the LRM-5 may also be mounted
to the back side of your rearview mirror. Be careful not to block
the rear facing lens when mounted in this manner. Also, clean
the appropriate surfaces with isopropyl alcohol before adhering
the adhesive side of the fastener to those surfaces.
LRM-5 mounted to rearview mirror with Hook & Loop Fasteners.
13
Advertisement
Table of Contents
