Table of Contents
Advertisement
INST ALLA TION OF CONTROL PANEL
General Information
The control panel may be mounted using the Under Dash
Bracket or Hook & Loop fastener supplied. As an alternative, you
may also use a Through Dash Bracket. When choosing a mounting
location, consider your needs for ease of viewing the display,
accessibility of controls (remember Mute Mode may be used
frequently), and concealment.
Control Panel Mounted With Under Dash Bracket
Fasten the Under Dash Bracket to your vehicle's dash with the
two #4 x 5/8" sheet metal screws provided. A 5/64" drill bit
should be used to drill pilot holes for the screws. Use the holes in
the bracket to mark the location for pilot holes.
Once the bracket is fastened to your vehicle, the control panel
can be attached to it. However, we suggest connecting all cables
to the back of the control panel before snapping it into the bracket.
See page 15 for proper placement of cables.
HIGHWAY
HIGHWAY
Control panel snaps into rather than slides onto the Under Dash Bracket.
14
Advertisement
Table of Contents
