Time - Linksys WRVS4400N User Manual

Setting Up and Configuring the Router
Setup Tab
Click the Save Settings button to save the Routing settings, click the Cancel Changes button
to undo your changes or click the Show Routing Table button to view the current routing
table.

Time

You can either define your Router's time manually or automatically through Time Server. The
default is Automatically.
Manually
Set the local time Manually—If you wish to enter the time and date manually, select the Date
from the drop-down fields and enter the hour, minutes, and seconds in the Time field using 24
hour format (example 10:00pm would be entered 22:0:0).
Automatically
Set the local time using Network Time Protocol (NTP) Automatically. If you wish to use a
Network Time Protocol server to set the time and date, select this option, then complete the
following fields.
Time Zone—Select the time zone for your location and your setting synchronizes over the
Internet with public NTP (Network Time Protocol) Servers.
Auto Daylight Saving—If your location observes daylight savings time, select the Enable
option.
User Defined NTP Server—To use your own NTP server, select the Enabled option. The
default is Disabled.
NTP Server IP Address—Enter the IP address of your own NTP server.
WRVS4400N User Guide 44