Windows 2000 Or Xp Instructions - Linksys WRVS4400N User Manual

The following example shows the Ethernet adapter's IP address as 192.168.1.100. Your
computer may show something different.

Windows 2000 or XP Instructions

1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.
2. At the command prompt, enter ipconfig /all. Then press the Enter key.
Write down the Physical Address as shown on your computer screen. It is the MAC address
for your Ethernet adapter. This appears as a series of numbers and letters. The MAC address/
Physical Address is what you will use for MAC address cloning or MAC filtering.
The following example shows the Ethernet adapter's IP address as 192.168.1.100. Your
computer may show something different.
WRVS4400N User Guide
MAC Address/Adapter Address
Windows 2000 or XP Instructions
146