Linksys WRVS4400N User Manual page 38

Setting Up and Configuring the Router
Setup Tab
Keep Alive Redial period—TAllows the Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically re-establish your
connection. To use this option, click the option next to Keep Alive. In the Redial Period field, you
specify how often you want the Router to check the Internet connection. This option is enabled
by default and the default Redial Period is 30 seconds. Use this option to minimize your Internet
connection response time since it will always be connected.
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe and
Israel only.
IP Address—The Router's IP address, when seen from the WAN, or the Internet. Your ISP will
provide you with the IP Address you need to specify here.
Subnet Mask—The Router's Subnet Mask. Your ISP will provide you the Subnet Mask and your
IP address.
Default Gateway—Your ISP will provide you with the Default Gateway IP Address.
PPTP Server—Enter the IP address of the PPTP server.
User Name and Password—Enter the User Name and Password provided by your ISP.
Connect on Demand: Max Idle Time—Configure the Router to cut the Internet connection
after it has been inactive for a specified period of time (Max Idle Time). If your Internet
connection has been terminated due to inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you attempt to access the Internet again.
If you wish to activate Connect on Demand, click the Connect on Demand option and enter
WRVS4400N User Guide 32