Table of Contents
Advertisement
Troubleshooting System Problems
If you hear one long beep followed by two short beeps, then a video problem has
probably occured, and the BIOS is having difficulty initializing the video screen. Any
other beep sequences that may or may not occur are probably due to memory
problems.
Displayed Error Messages
If an error occurs after the system display has been initialized, the error message will be
displayed as follows:
and the system will halt. Depending on how the Halt On setting was configured in the
Standard CMOS Setup menu, the system may or may not display the error message.
may also appear. Press <F1> to run AwardBIOS Setup if this message appears. The
following two pages show possible error messages and explainations.
S2390B Trinity KT-A
ERROR Message Line 1
ERROR Message Line 2
Press <F1> to continue
RUN SETUP UTILITY
57
Advertisement
Table of Contents
