How To; Activate Voice Dialing - Jabra 100-94100000-02 - BT4010 - Headset User Manual

hoW To

Answer a call
- tap the answer/end button on your headset to answer a call .
End a call
- tap the answer/end button to end an active call .
Make a call
- When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset . If your phone does not allow this feature, tap on the
Jabra bt4010's answer/end button to transfer the call to the
headset .
Reject a call *
- press the answer/end button when the phone rings to reject an
incoming call . depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
you will hear a busy signal .

Activate voice dialing*

- press the answer/end button . For best results, record the voice-
dialing tag through your headset . please consult your phone's
user manual for more information about using this feature .
Redial last number *
- double tap the answer/end button when the headset is on and
not used .
Adjust sound and volume *
- tap the volume up or down to adjust the volume .
Call waiting and placing a call on hold*
this lets you put a call on hold during a conversation and answer
a waiting call .
- press the answer/end button once to put the active call on hold
and answer the waiting call .
- press the answer/end button to switch between the two calls .
- tap the answer/end button to end the active conversation .
* phone dependent Jabra bt4010
7