Jabra Talk 65 - Headset Manual

Welcome

Thank you for using the Jabra Talk 65. We hope you will enjoy it!

Jabra Talk 65 features

• 80% noise cancellation with 2 microphones
• All-day calls with up to 14 hours talk time
• Outstanding fit & comfort
• Up to 300 feet/100 meters wireless range
• Protection against dust and water (IP54 rated)
• Media streaming & voice assistant access

Overview

*Device dependent

Included accessories

How to wear

The headset can be worn on the left or right ear.

To wear the headset on the other ear, rotate the microphone horizontally to the other side. Then swivel the microphone up and over and point it towards your mouth.

Selecting an EarGel

It is important to wear the headset with the most comfortable EarGel size for your ears. This will ensure the best audio experience.

How to get the perfect fit

For the best audio quality and comfort, the eargel should fit firmly in your ear, but should not be squeezed into your ear canal.

How to charge

To charge the headset, connect the USB charging cable to the headset's USB charging port. It is recommended to charge the headset using the supplied charging cable. It takes up to 150 minutes to fully charge the battery.

While charging, the LED indicator shows the charging status. Red indicates the headset is charging. Blue indicates the headset is fully charged.

Charging

Fully charged

How to connect

Power on

Press and hold the Multi-function button for 1 second until the LED flashes blue and you hear "Power on".

Power off

Press and hold the Multi-function button for 3 seconds until the LED flashes red and you hear "Power off".

Pair to your smartphone

1. Ensure the headset is powered off.
2. Press and hold the Multi-function button for approx. 6 seconds until you hear "Pair mode" and the LED flashes red and blue. The headset is now ready to pair.
3. Go to the Bluetooth menu on your smartphone and select the Talk 65 from the list of available devices.

Connect to your smartphone using NFC

1. Ensure your headset is powered on, and that NFC is enabled on your smartphone.
2. Place the NFC zone of your smartphone against the NFC zone of the headset until your smartphone confirms the connection.

Please note that not all phones support NFC pairing.

NFC Zone

How to use

Calls

What the buttons do
	Answer call	Press the Answer/end call button
	End call	Press the Answer/end call button
	Reject call	Double press the Answer/end call button
	Redial last number	Double press the Answer/end call button when not on a call
	Adjust volume	Press the Volume up or Volume down button, when listening to music or on a call
	Turn LEDs on/off	Press both the Volume up and Volume down buttons simultaneously
	Transfer audio from headset to smartphone	While on a call, press and hold (2 sec) the Volume down button to transfer to the call audio to your paired smartphone. Repeat to transfer the call audio back to your headset
	Mute/un-mute microphone	Press the Multi-function button when on a call
	Activate Voice Assistant (i.e. Siri, Google Assistant)	Press the Multi-function button when not on a call

Multiple call handling

The headset can accept and handle multiple calls at the same time.

Multiple call handling
	End current call and answer incoming call	Press the Answer/end call button
	Put current call on hold and answer incoming call	Press and hold (2 second) the Answer/end call button
	Reject incoming call when on a call	Quickly press the Answer/end call button twice

Multipoint mode

The headset can pair to 8 smartphones or tablets and connect to two at once (Multipoint mode).
To connect to two smartphones, use the normal pairing process separately for each smartphone (refer to section 5).
The JabraTalk 65 will monitor both smartphones and enable you to answer a call on either one using the headset.
If you are on a call and the other smartphone receives a call, you will hear a notification in the headset.

How to reset

Resetting the headset clears the list of paired devices.

1. Ensure the headset is powered on.
2. Press and hold (10 sec) both the Volume up and Volume down buttons until you hear two beeps.
3. Power off the headset.

You will need to re-pair the headset to your smartphone.

Support

FAQ

View the FAQs on Jabra.com/help/talk65

How to care for your headset

• To prevent the depletion of the battery lifetime or capacity, avoid storing the headset in hot or cold environments, such as a closed truck in summer or in winter conditions.
• When exposed to water, allow the headset sufficient time to dry. It may take up to one hour for the headset to dry thoroughly and power on.
• Do not store the headset for extended periods of time without recharging them (max. three months).

How to clean your headset

1. Apply normal dish soap and water to a cloth, making sure to wring out any excess liquid so the cloth is not dripping wet. Use soap and water only; do not use strong cleaning agents.
2. Gently wipe the headset with the wet cloth, making sure the headset is clean with no layer of suds on the surface.
3. Let the headset rest for at least one minute.
4. Wipe the headset clean with a cloth dampened with water only.
5. Allow the product to dry.

Documents / Resources

References

• Jabra Talk 65 | Jabra Support

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Jabra Talk 65 - Headset Manual