Advertisement
Jabra Evolve 75e features
Jabra Evolve 75e is designed to be worn around the neck.
For the optimal call experience, position the microphone as close to your mouth as possible.
The earbuds are supplied with three EarGel and EarWing sizes: large, medium and small.
It is highly recommended to mix and match the different EarGel and EarWing sizes to find the best combination for your ear. The correct fit will feel tight and will seal out background noises.
To properly attach the EarWing, align the indent on the EarWing (as illustrated) with the ridge on the earbud, and stretch the EarWing over the earbud. It will fit perfectly in the groove when properly attached.
The earbuds are magnetic, and connect together for convenient cable and power management. When the earbuds are connected, your music will be paused or your call will be ended. Go to section 6.1. for more information.
To charge the earbuds, connect a USB charging cable to the USB charging port on the neckband. It is recommended to charge the earbuds using the supplied Jabra charging cable, however it is possible to charge the earbuds using your smartphone charger.
It takes approx. 2 hours to fully charge the earbuds.
Note: Always clean and dry the USB charging port before charging the earbuds. It is recommended to recharge the earbuds at least once a month.
On: Hold the Multi-function button for 1 second. The LED will flash green, and the neckband will vibrate.
Off: Hold the Multi-function button for 3 seconds. The LED will flash red, and the neckband will vibrate.
Calls & music | ||
Power on | Hold (1 sec) the Multi-function button | |
Power off | Hold (3 sec) the Multi-function button | |
Play/pause music | Hold (1 sec) the Multi-function button (smartphone only) | |
Answer/end call | Press the Multi-function button | |
Reject call | Double-tap the Multi-function button | |
Put call on hold | Hold (1 sec) the Multi-function button | |
Answer/end call or play/ pause music | Detach/attach the magnetic earbuds | |
Adjust volume | Press the Volume up or Volume down button, when listening to music or on a call | |
Next track | Hold (1 sec) the Volume up button (smartphone only) | |
Previous track | Hold (1 sec) the Volume down button (smartphone only) | |
Battery status | Press the Volume up or Volume down button, when not listening to music or on a call | |
Busylight on/ off | Press both the Volume up and Volume down buttons simultaneously | |
Siri or Google Now | Press the Mute/Voice button, when not on a call | |
Mute/un-mute microphone | Press the Mute/Voice button, when on a call | |
Cycle between ANC and HearThrough modes | Press the Audio mode button | |
Listen-in on/off | Hold (2 secs) the Audio mode button |
The earbuds use Active Noise Cancellation (ANC) to eliminate outside disturbance, allowing you to fully focus.
Press the Audio mode button to cycle through the available options.
HearThrough enables you to hear your surroundings without needing to remove the earbuds. Your music will not be muted.
Press the Audio mode button to cycle through the available options.
Listen-in enables you to engage in conversations without needing to remove the earbuds. Your music will be muted.
Hold (2 secs) the Audio mode button to activate Listen-in.
Voice guidance are announcements intended to guide you or give earbud status updates (e.g. connection and battery status).
How to turn voice guidance On/Off
Voice guidance is enabled by default.
Voice Guidance On: Ensure the earbuds are powered on, and then hold the Mute/Voice button for 5 seconds.
Voice Guidance Off: Ensure the earbuds are powered on, and then hold the Mute/Voice button for 5 seconds.
Phone voice commands enable you to speak to Siri or Google Now on your smartphone using your earbuds. For more information on using Siri or Google Now, please refer to your smartphone's user manual.
Phone voice commands | ||
Activate Siri or Google Now (phone dependent) | Press the Mute/Voice button, when not on a call |
The earbuds can answer or reject calls when you are already on a call.
Multiple call handling | ||
End current call and answer incoming call | Press the Multi-function button | |
Put current call on hold and answer incoming call | Hold (1 secs) the Multi-function button | |
Switch between held call and active call | Hold (1 secs) the Multi-function button | |
Reject incoming call, when on a call | Double-tap the Multi-function button |
The Busylight lets others know when you are busy or on a call.
Busylight | ||
Busylight on/off | Press both the Volume up and Volume down buttons simultaneously to turn the Busylight on/off |
To disable (or re-enable) the Busylight function, hold both the Volume up and Volume down buttons simultaneously for 3 seconds.
The earbuds will vibrate whenever they are powered on/off, connected to your smartphone or computer, or whenever there is an incoming call.
Resetting the earbuds clears the list of paired devices and all earbud settings.
After resetting, it is necessary to re-pair the earbuds to your smartphone or to your
Bluetooth adapter (Jabra Link 370). Please note that Jabra Direct is required to re-pair the earbuds to the Bluetooth adapter.
Reset | ||
Reset the pairing list | Ensure the earbuds are powered on and you are not on a call. Then simultaneously hold the Volume up button and the Multi-function button for 5 seconds. You will then need to re-pair the earbuds. |
Firmware updates improve performance, or add new functionality to Jabra devices.
View the FAQs on Jabra.com/Evolve75e
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Evolve 75e that isn't answered in the manual? Leave your question here.