Setting Up For Initial Use - Creative Sound Blaster Tactic3D Rage Wireless Manual

Using Your Sound Blaster Tactic3D Rage Wireless
Here we explain how to use the headset including the following procedures:

Setting Up for Initial Use

l
Adjusting the Volume
l
Using Your Headset While Charging
l
Manual Pairing
l
Usage Scenarios
l
Setting Up for Initial Use
Step 1 : Charge it
Your headset can be used out of the box by connecting it via the charging cable to a computer. The
headset will charge while it is in use. However, please note that your headset will not be fully charged
if you skip the initial charging process detailed below.
Note:
You are recommended to charge your headset for at least 8 hours before it is used for the first
time. Connect your headset to your computer using the Micro-USB to USB cable and keep it
turned off during this initial charging process. The Power LED flashes white when charging and
will turn off once charging completes.
Note:
Press and hold the Power LED button for 3 seconds to turn the headset off.
Using Your Sound Blaster Tactic3D Rage Wireless 4