Setting Up Your Headset
Before using your headset, you should install the drivers and applications for it by
following the steps below. This enables you to enjoy the full features of your
headset such as THX TruStudio PC audio enhancements and customizable LED
colors.
Step 1: Charge your headset
For first use, connect your headset to your computer's USB port using the USB
power charging cable and charge for at least 2.5 hours. Turn off the headset while
charging. The Power LED flashes red when charging, and lights up red when fully
charged.
Step 2: Download the software
Visit www.soundblaster.com/products/wowheadset_wireless to download the
latest drivers and applications available for your headset.
Step 3: Connect the transmitter to your computer's USB port
NOTE
If prompted for the audio drivers, click the Cancel button.