Pioneer DEH-4400HD Owner's Manual page 6

Section
Operating this unit
02
Basic operations
Selecting a band
1 Press BAND/
until the desired band (FM1,
FM2,FM3 for FM or AM) is displayed.
Manual tuning (step by step)
1 Press c or d.
! When an analog station is received, tuning
down operation is conducted within the
analog broadcasting. (6 d 2)
! If a digital broadcast is not yet received,
tuning-up operation tunes in the next ana-
log station. (2 d 6)
Seeking
1 Press and hold c or d, and then release.
You can cancel seek tuning by briefly pressing
c or d.
While pressing and holding c or d, you can
skip stations. Seek tuning starts as soon as
you release c or d.
Storing and recalling stations
for each band
Using preset tuning buttons
1 When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
6
En
2 Press one of the preset tuning buttons (1
to 6) to select the desired station.
# You can also recall stored radio stations by press-
ing a or b during the frequency display.
Switching the display
Selecting the desired text information
1 Press
.
Analog Radio station: Station name/fre-
quency—song title/artist name—entertain-
ment—frequency
HD Radio station: Call sign/station name/fre-
quency—song title/artist name—album title/
artist name—genre—entertainment—fre-
quency
! Text information items that can be changed
depend on the area.
! Depending on the band, text information can
be changed.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores
the six strongest stations in the order of their sig-
nal strength.
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
LOCAL (local seek tuning)
Operating this unit
Local seek tuning lets you tune in to only those
radio stations with sufficiently strong signals for
good reception.
1 Press M.C. to select the desired setting.
FM: OFF—LV 1—LV 2—LV 3—LV 4
AM: OFF—LV 1—LV 2
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
HD SEEK (seek mode)
Seek tuning setting can be changed between digi-
tal station seek (ON) and all station seek (OFF) de-
pending on the reception status.
1 Press M.C. to select your favorite setting.
OFF—ON
BLEND (reception mode)
If a digital broadcast reception condition gets
poor, this unit automatically switches to the ana-
log broadcast of the same frequency level. If this
function is set to on, the tuner switches between
digital broadcast and analog broadcast automati-
cally. If this function is off, reception will be con-
ducted within an analog broadcast.
1 Press M.C. to turn this function on or off.
Note
If HD SEEK is set to ON and BLEND is set to off,
the tuner cannot receive broadcasts. In this
case, the seek mode or reception mode is
changed automatically as follows:
! When HD SEEK is set to ON, if you switch
BLEND from on to off, HD SEEK is changed to
OFF.
! When BLEND is set to off, if you switch HD SEEK
from OFF to ON, BLEND is changed to on.
CD/CD-R/CD-RW and USB
storage devices
Basic operations
Playing a CD/CD-R/CD-RW
1 Insert the disc into the disc loading slot with
the label side up.
Ejecting a CD/CD-R/CD-RW
1 Press h.
Playing songs on a USB storage device
1 Open the USB port cover.
2 Plug in the USB storage device using a USB
cable.
A song will be played automatically.
Stopping playback of files on a USB storage de-
vice
1 You may disconnect the USB storage device at
any time.
The unit stops playback.
Selecting a folder
1 Press 1/
or 2/ .
Selecting a track
1 Press c or d.
Fast forwarding or reversing
1 Press and hold c or d.
! When playing compressed audio, there is no
sound during fast forward or reverse.
Returning to root folder
1 Press and hold BAND/ .
Switching between compressed audio and CD-DA
1 Press BAND/ .
Switching between playback memory devices
You can switch between playback memory devices
on USB storage devices with more than one Mass
Storage Device-compatible memory device.
1 Press BAND/ .
! You can switch between up to 32 different
memory devices.