I/O Device Configuration Sub-Menu - TYAN TIGER K8WE Manual

3.6.6 - I/O Device Configuration Sub-Menu

You can use this screen to select options for the I/O Device Configuration
settings. Use the up and down <Arrow> keys to select an item. Use the <Plus>
and <Minus> keys to change the value of the selected option.
Advanced
Serial port A:
Serial port B:
Mode:
Parallel port:
Mode:
Floppy disk controller:
Base I/O address
↑↓: Select Item
F1: Help
← →: Select Screen Enter: Select
Esc: Exit
F10: Previous Values
Feature
Serial port A
Serial port B
Mode
Parallel port
Mode
Floppy disk controller
Base I/O address
PhoenixBIOS Setup Utility
[Auto]
[Auto]
[Normal]
[Auto]
[ECP]
[Enabled]
[Primary]
-/+: Change Values
Option
Disabled
Enabled
Disabled
Enabled
Normal
IR
Disabled
Enabled
Output only
Bi-directional
Disabled
Enabled
Primary
Secondary
53
http://www.tyan.com
Item Specific Help
F9: Setup Defaults
Sub-Menu
Description
Configure serial port A
using options.
Configure serial port B
using options.
Set the mode for Serial
port B using options.
Configure parallel port
using options.
Set the mode for parallel
port using options.
Configure Floppy disk
controller using options.
Set the base I/O address
for parallel port.