Installing The Memory - TYAN TIGER K8WE Manual

Hide thumbs Also See for TIGER K8WE:
Table of Contents

Advertisement

2.10 - Installing the Memory

Before attempting to install any memory, make sure that the memory you
have is compatible with the motherboard as well as the processor.
The following diagram shows common types of DDR SDRAM modules:
Here are a few key points to note before installing memory into your Tiger
K8WE:
• Always install memory beginning with CPU1 DIMMA1.
• In order to access memory on CPU2, both processors must be installed.
• Single, pairs are supported on CPU1, four modules is also supported on
CPU2.
• Configure memory symmetrically on each CPU for best performance.
• AMD Opteron
(interleaved) memory configurations
• At least ONE Registered DDR SDRAM module must be installed for the
system to turn on and POST (power on self test)
• 128MB, 256MB, 512MB, 1GB, 2GB and
DDR400/333/266 DDR memory modules are supported
• All installed memory will be automatically detected
• The Tiger K8WE supports up to
* Not validated at time of print
TM
processors support 64bit (non-interleaved) or 128bit
http://www.tyan.com
4GB*
Registered
24GB*
with two CPU's installed.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

S2877

Table of Contents