TYAN TIGER 100 Manual page 37

Hide thumbs Also See for TIGER 100:
Table of Contents

Advertisement

Q: I´m getting a "motherboard resource conflict" - seen in Win95/98 Device
Manager as a yellow Exclamation Mark image. How do I clear it up?
A: More than likely, you have BIOS version 1.03. You need to install BIOS
version 1.07 to resolve this problem.
Q: My Wake-On LAN network burned out my power supply. What should I
do?
A: You need to use a power supply with 800ma at +5VSB power line. This is
because most Wake-On LAN network cards require +5V 750 mA in sleep mode.
We recommend our customer to purchase the ATX power supply with
minimum 800 mA at +5V SB output to avoid over-current damage to the power
supply.
Q: How can I disable the keyboard detection in the BIOS v.1.12?
A: You need to enable the Quick Boot option in CMOS - then the BIOS will not
check for a keyboard.
S1832DL Tiger 100
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tiger 100 s1832dl

Table of Contents