TYAN TIGER 100 Manual page 27

SEC Pentium II
On both sides of the SECC-2 CPU reside the lower tabs of the aluminum heat
sink and the bottom corners of the plastic CPU enclosure (see Figure 2-16).
These tabs and corners should fit into the retention braces.
Warning: DO NOT first screw the retention braces onto the motherboard by
warning
themselves. If you do, you will have difficulties inserting the CPU into the
retention braces and CPU slot.
S1832DL Tiger 100
SECC-2 Pentium II
Figure 2-15
Lower Tabs
Enclosure
Corners
Figure 2-16
27