Table of Contents
Advertisement
Board Installation
Unpacking
The motherboard package should contain the following:
(1) S1834 mainboard
(1) 34-pin floppy cable pack
(1) 80-pin ATA-66 IDE cable
(1) S1834 User's Manual
(1) Driver CD
(2) URM Retention Modules
(Terminator card is currently not needed on this board when using only a
single processor. Check http://www.tyan.com for information and updates
concerning CPUs.)
Installation
You are now ready to install your motherboard. The mounting hole pattern of
the S1834 matches the ATX system board specifications. Your chassis should
support a standard ATX mainboard form factor.
How to install our products right...the first time.
What's the first thing I should do?
The first thing you should do is read this user's manual. It contains important
information which will make configuration and setup much easier.
Here are some precautions you should follow when installing your mother-
S1834 Tiger 133
9
Hide quick links:
Advertisement
Table of Contents
