Zenith 32LC2DA Installation And Operating Manual page 7

Introduction
int
n
Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the
dealer from where you purchased the producL
User must use shielded signal interface cables (D-sub 15 pin cable) with ferfite cores to maintain standard compli-
ance for the product.
Power Cord 75_ Round Cable
For Z42i50PX3D
.......................................................... _
2=TV brackets
2-Wall brackets
Owner's Manual Remote Control /
Batteries
For Z32LC2DA, _7LC2DA, Z42LC2DA
2-TV Bracket Bolts Twister Holder Cable
Arrange the wires Management
with the twister holder. (Refer p,t8)
Stand Installation for Z32LC2DA
1
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
2
Place the hook of the stand in the back of the
product as shown.
3
Instalt the 4 bolts provided securely, in the back of the
product.
7