Zenith 32LC2DA Installation And Operating Manual page 17

- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
- Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides
of the screen may remain visible on the screen.
VCR
Jtl
O Connect the AUD|OiVIDEO jacks between TV
and VCR Match the jack colors (Video = yeltow,
Audio Left = white, and Audio Right = red)
insert a video tape into the VCR and press PLAY
on the VCR, IRefer to the VCR owner's man _al,_
_} Select AV1 input source using the INPUT button
on the remote control.
- Jfconnected to AV IN2, select AV2 input souree_
_u have a mono VCR connect the audio cable from the VCR to the AUDIO L!MONO jack of the
17