Configuring Proxy Settings - ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER SBS EDITION - UPDATE 3 User Manual

Depending on your settings, this backup will be either full or incremental. But its size is not likely to
be less than a full backup size. Therefore, it is not practical to reassign a subscription to a machine
whose first backup was done as an initial seeding. You will need to either redo the initial seeding
(which requires a new license) or to transfer the sizeable backup over the Internet.
All earlier created backups remain intact. You can delete them manually if necessary. Keep in mind
though, backups can be deleted from a subscription only by the machine to which the subscription is
assigned. In our example, you have the following options.
Before reassigning
Delete backups from Subscription 1 using Machine 1 (if it is available and turned on). Delete backups
from Subscription 2 using Machine 2.
After reassigning
Delete backups from Subscription 1 using Machine 2. You cannot delete backups from Subscription 2,
unless you assign this subscription to any machine.

8.5 Configuring proxy settings

If one or more machines where you installed agents connect to the Internet through a proxy server,
you need to configure each of the agents to use the proxy server.
The management server connects to the Internet to retrieve information about online backup
subscriptions. The proxy settings for the management server also need to be configured.
Proxy settings for the agent and the management server are configured separately, even if both are
installed on the same machine.
382 Copyright © Acronis, Inc., 2000-2010