Using Line-Out - Sonos ZONEPLAYER 90 Setup Manual

Sonos ZonePlayer 90 Setup Guide

Using Line-Out

Use the ZonePlayer's audio outputs to connect a home theater, computer, powered
speakers, or an amplifier to the ZonePlayer 90.
Connecting to a home theater or amplifier
For additional information on connecting audio devices, please go to our Web site at
http://faq.sonos.com/cables.
1. If you have digital inputs on your home theater or amplifier, you can use either a
TosLink optical audio cable or a digital coaxial cable to connect the ZonePlayer 90's
digital output to the digital input on the receiver.
If you have analog inputs on your home theater or amplifier, use a standard RCA audio
cable to connect the ZonePlayer 90's analog audio output to the audio inputs on
the receiver.
2. Select the proper input channel on the receiver.
Controlling the volume from your home theater or amplifier
To control the volume exclusively from your home theater or amplifier, you can change
the line-out level on this ZonePlayer to Fixed by selecting one of the following options:
• Using the Sonos Controller, from the Music menu, select System Settings. Select
ZonePlayer Settings, and use the scroll wheel to highlight the ZonePlayer
attached to the receiver. Select Line-Out Level, and choose Fixed.
• Using the Desktop Controller software, select ZonePlayer Settings from the
Zones menu. Select the ZonePlayer attached to the receiver, and then click
Settings. Click the Line-Out tab, and choose Fixed.
19