Sonos ZONEPLAYER 90 Setup Manual page 14

Sonos ZonePlayer 90 Setup Guide
Attach the power cord, and then connect your ZonePlayer 90 to an external amplifier by
choosing one of the following options:
Connect to a home theater or amplifier
• If you have digital inputs on your home theater or amplifier, you can use either a
TosLink optical audio cable or a digital coaxial cable to connect the
ZonePlayer 90' s digital output to the digital input on the receiver.
• If you have analog inputs on your home theater or amplifier, use a standard RCA au-
dio cable to connect a ZonePlayer's analog audio output to the audio inputs on
the receiver.
• Select the proper input channel on the receiver.
• After you finish setting up your Sonos system, turn to page 19 to adjust the
volume settings.
Connect to a computer or powered speakers
• You will need a stereo mini to RCA Y-adapter audio cable (one 1/8-inch
stereo miniplug to dual RCA male connectors) to connect the ZonePlayer's
analog audio output to the computer's audio input.
• You may need a Y-adapter audio cable (one1/8-inch stereo miniplug to dual RCA
male connectors) to connect the speakers to the audio outputs on the ZonePlay-
er. If your speakers have a male 1/8-inch stereo plug, you will need to attach a fe-
male-to-female coupler between the speaker plug and the
Y-adapter audio cable.
For additional information on connecting audio devices, please go to our Web site at
http://faq.sonos.com/cables.
7