Replication Destination Volume Is Detached; Replication Disconnection; Replication Incompatible Versions; Replication Internal Error - Dell PowerVault NX3600 Administrator's Manual
Fluidfs nas solutions
Hide thumbs
Also See for PowerVault NX3600:
- Command line interface manual (93 pages) ,
- Owner's manual (47 pages) ,
- Deployment manual (37 pages)
Table of Contents
Advertisement
Workaround
Replication Destination Volume Is Detached
Description
Cause
Workaround
Replication Disconnection
Description
Cause
Workaround
Replication Incompatible Versions
Description
Cause
Workaround
Replication Internal Error
Description
Workaround
The replication continues automatically when the space is
available. The administrators must verify that the
replication automatically continues after a period of time
(an hour).
Replication between the NAS source volume and the NAS
destination volume fails because the NAS destination
volume is detached from the NAS source volume.
Replication task fails because the destination NAS volume
was previously detached from the source NAS volume.
The administrators must perform the detach action on the
NAS source volume. If required, reattach both NAS
volumes in a replication relation.
Replication between the NAS source volume and the NAS
destination volume fails because the connection between
source and destination systems is lost.
Network infrastructure disconnection between the source
and the destination.
The administrator must check if the replication is
automatically restored. If the replication is not
automatically restored, check the network communication
between the source cluster and the destination cluster.
Network communication can be checked by using a third
party system in the same subnet that can ping both the
source and destination clusters.
Replication between the NAS source volume and the NAS
destination volume fails because the system version of the
source NAS cluster is higher than the system version of
the destination cluster.
Replication task fails since the system version of the
source NAS cluster is higher than the system version of
the destination cluster.
Administrators must upgrade the system version of the
destination cluster to match the system version of the
source cluster.
Replication between the source and the destination NAS
volumes fails due to an internal error.
Contact Dell to resolve this issue.
83
Advertisement
Table of Contents
Troubleshooting
