Configuring Dns; Viewing Dns Servers; Adding Dns Servers And Dns Suffixes; Removing Dns Servers And Dns Suffixes - Dell PowerVault NX3600 Administrator's Manual
Fluidfs nas solutions
Hide thumbs
Also See for PowerVault NX3600:
- Command line interface manual (93 pages) ,
- Owner's manual (47 pages) ,
- Deployment manual (37 pages)
Table of Contents
Advertisement
The solution is to define, in addition to a default gateway, a specific gateway for certain subnets–configuring static
routes. To do this you must describe each subnet in your network and identify the most suitable gateway to access that
subnet.
You do not have to do so for the entire network - a default gateway is most suitable when performance is not an issue.
You can select when and where to use static routes to best meet your performance needs.
Configuring DNS
Domain Name System (DNS) is the name resolution service that enables users to locate computers on a network or on
the Internet (TCP/IP network) by using the domain name. The DNS server maintains a database of domain names (host
names) and their corresponding IP addresses providing name-to-address and address-to-name resolution services on
the IP network. You can configure one or more external DNS server (external to NAS cluster solution but within the site)
to be used for name resolutions.
Viewing DNS Servers
To view a list of existing DNS servers and their parameters, select Cluster Management → Network → DNS
Configuration, the DNS Configuration page displays the list of existing DNS servers and their parameters.
Adding DNS Servers And DNS Suffixes
1.
Select Cluster Management → Network → DNS Configuration.
The DNS Configuration page is displayed.
2.
To add a DNS server, click Add DNS Server.
A new empty row is added to the list of DNS servers.
3.
Set the IP address of the client environment primary DNS.
4.
To add a DNS suffix, click Add DNS Suffix.
A new empty row is added to the list of DNS suffixes.
5.
Enter the DNS suffixes in order of precedence.
6.
Click Save Changes.
Removing DNS Servers And DNS Suffixes
1.
Select Cluster Management → Network → DNS Configuration.
The DNS Configuration page displays the list of existing DNS servers and their parameters.
2.
Select the appropriate DNS server and/or DNS suffix and click Delete.
A message prompts you that the deleted DNS server saves all other changes that have been made.
3.
Click OK.
Managing Static Routes
To minimize hops between routers, static routes are suggested in routed networks when there are multiple direct paths
from the NAS cluster solution to various routers.
63
Advertisement
Table of Contents
Troubleshooting
