Configuring Additional Client Vips - Dell PowerVault NX3600 Deployment Manual

The Configuration Wizard (NFS export) step 14 of 14 screen with the existing NFS exports is displayed.
43. To add additional NFS exports, click Add and repeat step 38 to step 41.
44. Click Next.
The system Configuration Wizard is complete.

Configuring Additional Client VIPs

NOTE:
• If the client network is routed to get to the FluidFS cluster, one client VIP is needed for each port. Each
appliance can have up to four VIPs.
• If the client network is not routed to get to the FluidFS cluster, only one client VIP is needed.
To configure additional client VIPs:
1. Select Cluster Management → Network → Subnets.
The Subnets screen displays all the available subnets.
2. Click the Primary subnet.
The Add/Edit Subnet screen is displayed.
3. In VIP address, add additional client VIP addresses, as required.
NOTE: If you need more than four VIPs, click Add VIP.
4. Click Save Changes.
28