Sonos CONTROLLER FOR IPHONE User Manual page 22

18
Add a ZoneBridge
If you are adding a ZoneBridge to an EXISTING Sonos system, please follow the steps
below. If you are setting up a NEW Sonos Multi-Room Music System, please see
"Setting Up a New Sonos System" on page 6 instead.
You can use a Sonos ZoneBridge to replace the ZonePlayer that is currently wired to
your router, or you can place a ZoneBridge in any location to extend the wireless range
of your Sonos Multi-Room Music System.
Note: If you are replacing the wired ZonePlayer in your music system with
a Sonos ZoneBridge, first add the new ZoneBridge to your music system
(steps below). You can then unplug the wired ZonePlayer from your router,
replace it with the Sonos ZoneBridge, and move the original ZonePlayer to
a new location.
1. Attach the power adapter and plug in the ZoneBridge. Be sure it is the proper
power adapter for your country.
2. Add the ZoneBridge to your music system by selecting System Settings>Add a
Zone from the Music menu.
During the setup process, you will be prompted to press and release
the Connect button on top of the ZoneBridge. The indicator lights
will flash green and white while the ZoneBridge is connecting.
Now that you've added the ZoneBridge to your music system—
• If you are replacing the ZonePlayer that is currently attached to your router, you
can unplug the wired ZonePlayer, replace it with the Sonos ZoneBridge, and
move the original ZonePlayer to a new location.
• If you are using the ZoneBridge to extend the wireless network in your house,
locate the ZoneBridge wherever you want additional wireless coverage. If
desired, you can also move any existing ZonePlayer(s) to other locations.
A Sonos ZoneBridge will not display in your Zones menu after it is set up. If you wish
to change the settings for this device, you can tap System Settings>ZoneBridge
Settings from the Music menu.
Sonos® Controller for iPhone™ User Guide