Sonos CONTROLLER FOR IPHONE User Manual page 16

Hide thumbs Also See for CONTROLLER FOR IPHONE:

Table of Contents

Connect to a home theater or amplifier

• If you have digital inputs on your home theater or amplifier, you can use either a

TOSLINK® optical audio cable or a digital coaxial cable to connect the ZonePlay-

er 90/80's digital output to the digital input on the receiver.

• If you have analog inputs on your home theater or amplifier, use a standard RCA

audio cable to connect a ZonePlayer's analog audio output to the audio inputs

on the receiver.

• Select the proper input channel on the receiver.

• After you finish setting up your Sonos system, you can adjust the volume set-

tings using the Desktop Controller software or a Sonos Controller CR100. For

more information, go to http://www.sonos.com/support/documentation.

Connect to a computer or powered speakers

• You will need a stereo mini to RCA Y-adapter audio cable (one 1/8-inch stereo

miniplug to dual RCA male connectors) to connect the ZonePlayer's analog

audio output to the computer's audio input.

• You may need a Y-adapter audio cable (one1/8-inch stereo miniplug to dual

RCA male connectors) to connect the speakers to the audio outputs on the

ZonePlayer. If your speakers have a male 1/8-inch stereo plug, you will need to

attach a female-to-female coupler between the speaker plug and the Y-adapter

audio cable.

For additional information on connecting audio devices, you can visit our Web site at

http://faq.sonos.com/cables.

Sonos® Controller for iPhone™ User Guide

Table of Contents