Sonos CONTROLLER FOR IPHONE User Manual page 14

10
Step 2: Place the other ZonePlayers or ZoneBridges in the rooms of
your choice
• If you are adding a ZonePlayer 120/100, attach speakers to your ZonePlayer. For
help with this step, see "Connecting a ZonePlayer 120/100" on page 10.
• If you are adding a ZonePlayer 90/80, connect it to an external amplified device.
For help with this step, see "Connecting a ZonePlayer 90/80" on page 11.
• If you are adding a ZoneBridge, simply apply power.
Connecting a ZonePlayer 120/100
• Your speaker's power rating should be at least 75W for 8 Ohm speakers, and at
least 150W for 4 Ohm speakers. Do not connect speakers rated at less than 4
Ohms.
Note: Connect the red (+) and black (-) terminals from each speaker to
the corresponding terminals on the ZonePlayer. Mismatching of polarities
will result in weak central sound, and a distorted sense of sound direction.
When making connections, ensure that none of the strands of your speaker
wire come in contact with an adjoining terminal on the rear panel.
1. Use your thumb or finger to firmly push the spring-loaded speaker connector post
inward to reveal the connection hole.
2. Insert the stripped end of the speaker wire into the hole, then release. The stripped
portion should be caught firmly in the connector post.
Sonos® Controller for iPhone™ User Guide