Output Levels; Online Update - Russound SMS3 INSTALL Installation Manual

Smart media server

Hide thumbs Also See for SMS3 INSTALL:

Table of Contents

START UP

OPTIONS & STATUS CONFIGURATION

OUTPUT LEVELS

The Output Levels can be adjusted to reduce volume on a per-stream basis if users are experiencing

"hot" outputs or static bleed-through to amplifiers.

Many multizone controllers and receivers have different input sensitivity levels. The SMS3 has the abil-

ity to set reduced line-output levels in the event that the default levels over-drive some pieces of

equipment.

For instance, if you are connecting to an external amplifier from the zone line-level outputs on the

CAV6.6 or CAM6.6, if you encounter distortion or audio clipping from the media server source, set

the Output Level to Reduced in the Stream Options menu. You can change the output level on a per-

stream basis for maximum flexibility.

Note: As a precaution, it is highly recommended that you complete a backup of the database before

performing online updates! The update process is designed to preserve the database, but data

should be protected with a backup to be safe.

Note: After completing any update to the SMS3, be sure to clear the browser cache of all web

browsers on computers used with the SMS3 in order to view the updates.

The SMS3 firmware can be updated via an online process from the Online Update page. During the

online update, the media server must be connected to an active internet feed. Select Online Update,

and when ready, select Initiate Update. The media server will lock out user functions during this time.

When the update is complete, the page will display an "Update Complete" message and the media

server will be restarted.

Table of Contents