Test Cd Cataloging Function - Russound SMS3 INSTALL Installation Manual

TEST SMS3 CD CATALOGING FUNCTION
To test the SMS3's CD cataloging function, load a music CD into the CD drive and close the drawer.
Make sure the CD is clean and free of scratches. Dirty or damaged CDs may take much longer to
catalog. In some cases it may seem that the cataloging process may have stopped. If this occurs,
eject the CD, clean it and try again.
The amber LED on the front panel blinks while the CD is cataloged. It takes about 12 minutes to cata-
log a CD. When the cataloging process is finished, the amber LED will go dark, the CD will stop spin-
ning and the drawer will open.
2
1 3
1
MAIN POWER SWITCH - Turns power on and off (toggle up)
2
POWER ON/OFF LED - Indicates power on or off
3
IR RECEIVER - Receives IR signal from SMS3-RC remote control
4
INTERNAL CD DRIVE - Single CD drive for acquiring files
CD OPERATION LED - Indicates drive is accessing CD
5
OPEN/CLOSE BUTTON - Opens/closes CD drive
6
M S
S M S 3 S M A R T E D I A E R V E R
SMS3 Front Panel
START UP
TEST OPERATIONS
5 6
4
23