Opening And Closing The System; Opening The System; Closing The System - Dell DX6000 Hardware Owner's Manual

Opening and Closing the System

CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
WARNING:
avoid injury, do not attempt to lift the system by yourself.

Opening the System

1 Unless you are installing a hot-swappable component such as a cooling fan
or power supply, turn off the system and attached peripherals, and
disconnect the system from the electrical outlet and peripherals.
2 Rotate the latch release lock counter-clockwise to the unlocked position.
See Figure 3-3.
3 Lift up on the latch on top of the system and slide the cover back.
See Figure 3-3.
4 Grasp the cover on both sides and lift the cover away from the system.

Closing the System

1 Lift up the latch on the cover.
2 Place the cover onto the chassis and offset the cover slightly back so that
it clears the chassis hooks and lays flush on the system chassis.
See Figure 3-3.
3 Push down the latch to lever the cover into the closed position.
4 Rotate the latch release lock in a clockwise direction to secure the cover.
Whenever you need to lift the system, get others to assist you. To
Installing System Components
83