Dell DX6000 Hardware Owner's Manual page 149

8 When the backplane cannot slide upward any farther, pull the backplane
toward the back of the system to remove it from the retention hooks.
9 Lift the board out of the system, being careful to avoid damaging
components on the face of the board.
10 Place the SAS backplane face down on a work surface.
Figure 3-30. Removing and Installing a SAS Backplane
2
1
1 drive bays
3 power cable from system board
5 SAS B cable
7 securing tabs (7)
3
2 SAS backplane board
4 SAS A cable
6 securing slots (8)
8 SAS backplane board release tab
Installing System Components
4
7
8
5
6
149