DX Object Storage: Remote Synchronize Writes Configuration Introduction The DX Object Storage Platform provides a mechanism for applications to write data to a local DX Cluster and to replicate it over a standard IP network to a disaster recovery cluster synchronously, within a single request.
DX Object Storage: Remote Synchronize Writes Configuration Figure 2: SCSP Proxy Configuration Console To add a remote DX Cluster to the configuration list, click the ‘Add Cluster’ button. To edit an existing remote DX Cluster, click the ‘Edit’ button. To delete a DX Cluster from the list, click the checkbox in the Delete column next to the DX Cluster that should be deleted and then click the ‘Update and Restart’.
Figure 3: SCSP Proxy Adding Cluster Console Additional References The following documents can be found on www.support.dell.com and can be referenced for additional information on platform configuration required when utilizing the remote synchronous write feature to enable synchronous writes to a local and remote DX Cluster.