Using Easy Create To Create Iscsi Virtual Targets; Editing An Iscsi Target - Brocade Communications Systems 8 Administrator's Manual

15
Setting up iSCSI Target Gateway services
4. Enter an IQN. The text field displays the value "iqn" and you must enter the remaining data.
5. Click Add LUNs.
6. On the LUN Addition dialog box, select the LUNs to add.
7.
8. Click Next and click Finish.

Using Easy Create to create iSCSI virtual targets

Easy Create is an alternative method for creating iSCSI virtual targets.
Follow the Easy Create procedure to create iSCSI virtual targets.
1. Open iSCSI Target Gateway Admin module as described in
2. Select the Targets tab.
3. Click Easy Create.
4. Follow the instructions in the wizard to create a virtual target in iSCSI.

Editing an iSCSI target

You can edit a virtual target even when there is an active iSCSI session.
Use the following procedure to edit an existing iSCSI target.
1. Open iSCSI Target Gateway Admin module as described in
2. Select the Targets tab.
3. Select the IQN in the left pane of where you want to edit the targets.
4. Click Edit.
5. Follow the instructions in the wizard to edit an iSCSI virtual target.
192
DRAFT: BROCADE CONFIDENTIAL
The VT Configuration Wizard displays.
You must expand each unit until you get to the actual LUN.
Click Add LUN(s).
This adds the selected LUNs to your virtual target.
Gateway Admin Module" on page 188.
NOTE
When you click Add in the Easy VT Creation dialog box, virtual targets are created for all the
available physical targets in a one-to-one combination. If you add the virtual target using the
Add button and click OK, the virtual target is created for only the selected physical targets.
Gateway Admin Module" on page 188.
The VT Configuration wizard displays.
NOTE
The Remove LUN(s) button is available only for virtual targets that are fully initialized as a
target.
"Launching the iSCSI Target
"Launching the iSCSI Target
Web Tools Administrator's Guide
53-1001772-01