Access Gateway Limitations On The Brocade 8000; Figure 52 Access Gateway Auto Rebalancing - Brocade Communications Systems 8 Administrator's Manual

12

Access Gateway limitations on the Brocade 8000

4. In the Switch Explorer window, select Switch Admin. The Switch Administration window
5. Click Refresh.
6. Under the Access Gateway Mode section, do the following:
7.

Access Gateway limitations on the Brocade 8000

The following list the is a compilation of the limitations of using Access Gateway with the Brocade
8000 switch:
•
168
DRAFT: BROCADE CONFIDENTIAL
displays (Figure 52).
FIGURE 52 Access Gateway Auto Rebalancing
•
Select the N Port Auto Rebalancing check box to enable N_Port rebalancing.
•
Select F Port Auto Rebalancing check box to enable F_Port rebalancing.
•
Click Manual Balancing and a confirmation dialog box displays. Click Yes to change F
Port-N Port Mapping or click No to cancel the changes.
Click Apply to apply the changes.
Only the Port Grouping (PG) policy is supported. When the Access Gateway mode is first
enabled, the default PG policy is enforced.
Web Tools Administrator's Guide
53-1001772-01