Deleting Zones; Creating And Populating Enhanced Traffic Isolation Zones - Brocade Communications Systems 8 Administrator's Manual

9
Zoning management

Deleting zones

For information on enabling the configuration, refer to
Use the following procedure to delete a zone.
1. Open the Zone Administration window as described in
2. Click the Zone tab.
3. Select the zone you want to delete from the Name menu and click Delete.
4. On the confirmation dialog box, click Yes.
5. Select Zoning Actions > Save Config to save the configuration changes.

Creating and populating enhanced traffic isolation zones

An enhanced traffic isolation zone (TI zone) is a special zone that creates a dedicated path for a
specific traffic flow. When an enhanced TI zone is activated, inter-switch traffic from a zone
member is directed to E_Ports that are included in the TI zone. Traffic from outside the TI zone is
excluded. A maximum of 255 TI zones can be configured. LSAN devices can be added only in TI
zones created in the backbone switch.
A port may be assigned to more than one enhanced TI zone in a fabric. A port can be part of more
than one enhanced TI zone provided following conditions are satisfied:
•
•
•
Use the following procedure to create and populate an enhanced TI zone.
1. Open the Zone Administration window as described in
2. Under Zoning Modes, select Traffic Isolation Zones.
3. Click New on the menu bar.
4. Expand the Member Selection List to view the nested elements.
5. Select an element in the Member Selection List that you want to include in your zone.
6. Click Add Member to add the zone member.
130
DRAFT: BROCADE CONFIDENTIAL
window" on page 121.
The selected zone is deleted from the Zone Admin buffer. At this point, you can either save your
changes or save and enable your changes.
All the switches in the fabric should have Fabric OS v 6.4 or later.
A port can be assigned to multiple TI Zones that have the same failover state.
The fabric is composed entirely of Condor-2 or GoldenEye-2 switches:
window" on page 121.
The Traffic Isolation Zones view displays.
The Add TI Zone dialog box displays.
The Add Member button becomes active.
The selected member is moved to the Zone Members window.
NOTE
All switches in the fabric must be running Fabric OS v6.4.0 or later and all the ports in the TI
zones must be in the same failover mode.
"Enabling zone configurations"
"Opening the Zone Administration
"Opening the Zone Administration
Web Tools Administrator's Guide
on page 134.
53-1001772-01