JVC SR-L910UA - 24 Hour Time Lapse Vcr Instructions Manual page 29

7 RECORDING
7-3 Timer Recording
Start time (minute)
Start time (hour)
Day
Month
PROGRAM TIMER
(DAILY) S T A R T E N D
1. – – – – – – – : – – – – : – – – – H
2. – – – – – – – : – – – – : – – – – H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
Program No.
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
Blinking
4 5
.
PROGRAM TIMER
(DAILY) S T A R T E N D
1. – – – – – – – : – – – – : – – – – H
2. – – – – – – – : – – – – : – – – – H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
6 7
.
PROGRAM TIMER
(DAILY) S T A R T E N D
1. 9 – – – 3 0 – – 8 : 3 0 1 7 : 1 5 – – 6 H
2. – – – – – – – : – – – – : – – – – H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
8
.
PROGRAM TIMER
(DAILY) S T A R T E N D
1. 9 – – – 3 0 – – 8 : 3 0 1 7 : 1 5 – – 6 H
2. 10 – 1 1 0 : 0 0 2 2 : 0 0
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
Timer
TIMER
1
1 6 . 3 0 . 0 0
VCR's display
Stop time (hour)
Stop time (minute)
Record mode
MODE
TO END
MODE
TO END
MODE
TO END
MODE
2 4 H
TO END
Program No.
2
4
Select the timer program No.
Press the [SHIFT +] or [SHIFT -] button to move the
cursor arrow to the program No. to be set.
• Press the [SHIFT +] button to move the cursor arrow
down and the [SHIFT -] button to move it up.
5
Set the selected program No.
Press the [SET +] or [SET -] button.
[ The selected program No. blinks.
• Press the [SET +] button. The month blinks.
• Press the [SET -] button. The record mode blinks.
6
Set the timer.
1 Press the [SHIFT +] or [SHIFT -] button until the item
you want to set starts blinking.
• Press the [SHIFT +] button to shift the blinking to
the right.
"Month" [ "Day" [ "Start time (hour)"
(minute)" [ "Stop time (hour)"
[ "Record mode" [ Select the next program No.
• Press the [SHIFT -] button to move the blinking to
the left.
2 Press the [SET +] or [SET -] button to set the value
for the blinking item.
• Press the [SET +] button to increase the value and
the [SET -] button to decrease it.
Set the "Month", "Day", "Start time (hour)", "Start time
(minute)", "Stop time (hour)", "Stop time (minute)" and
"Record mode" with the [SHIFT +/-] and [SET +/-]
buttons.
[ When all values are set, the set program No. is
shown on the VCR's display.
7
Accessing another program No.
• Select the "Record mode" (so that it is blinking) and
press the [SHIFT +] button. Or, select "Month" (so that
it is blinking) and press the [SHIFT -] button.
[ The selected item stops blinking. You may now
select another program No.
8
To set more than one daily timer program, repeat
steps 4 to 7.
• To program the timer to record once a week
indefinitely, move the cursor arrow to the second
line <DAILY> and press the [SET +] or [SET -]
button. (For details, refer to page 30.)
9
To end timer programming, press the [MENU] button
twice.
[ The normal screen is restored.
Press the [TIMER REC] button.
[ • The TIMER indication and the daily timer
program numbers light in the VCR's display.
Power is switched off automatically and the VCR
enters the Timer Record Standby mode.
• During timer recording, the number of the daily
timer program currently being executed blinks.
[ "Start time
[ "Stop time (minute)"
29