Setting Of The Function Menu Switches; Function Menu Switch Setting - JVC SR-L910UA - 24 Hour Time Lapse Vcr Instructions Manual

5 SETTING OF THE FUNCTION MENU SWITCHES

You can customize the VCR's functions to suit the requirements of your application using on-screen menu's function switches.
● Menu function switches are available on four setting screens: ON SCREEN MODE, VTR MODE 1, VTR MODE 2 and
ALARM/SENSOR REC mode. (When the optional SA-K97U RS-232C interface board is installed, the RS-232C
PARAMETER setting screen is also available.)

5-1 Function Menu Switch Setting

Normal screen
[MENU]
[MENU]
button
button
Main menu screen
MAIN MENU
PROGRAM TIMER
FUNCTION
ALARM IN
POWER LOSS
HOUR METER
CLOCK ADJUST
[SET
+/-]
PRESS (SHIFT, SET)
PRESS (MENU) TO END
buttons
• When the optional SA-K97U RS-232C interface
board is installed, the RS-232C PARAMETER
setting screen is also available.
Preparation
5 Connect the VCR's video output connector to the
monitor's video input connector.
5 Turn on the VCR and the monitor. Make sure the Stop
mode is engaged.
1
Press the [MENU] button to display the main menu.
2
Press the [SHIFT +] or [SHIFT –] button to select
FUNCTION.
3
Press the [SET +] or [SET –] button.
[ The ON SCREEN MODE setting screen is
displayed.
• Only one menu switch is available in the ON SCREEN
MODE setting screen. This switch (<POSITION>)
allows you to select the screen position of the on-
screen display and to switch it ON/OFF.
4
Press the [SET +] or [SET –] button to enter the selected
position.
5
To display another setting screen, press the [SHIFT +/–]
button.
• Press the [SHIFT +] button to display the VTR mode 1
setting screen.
• Press the [SHIFT –] button to display the alarm/sensor
recording mode setting screen.
On-screen mode setting VTR mode 1 setting
ON SCREEN MODE
(SHARPNESS)
(AUTO REC)
(POSITION) L –UP
(REC CHECK)
(TAPE END MODE)
(INDEX SEARCH)
(CAMERA SW)
●
(TAPE END BUZZER)
(WARNING BUZZER)
PRESS (SHIFT, SET)
PRESS (SHIFT, SET)
PRESS (MENU) TO END
PRESS (MENU)
[SHIFT –] button
[MENU] button
[SHIFT +] button
COUNT/ SHIFT/TRACKING
CLOCK MENU
SET/V.LOCK
TIME TIMER
MODE REC
[SET –] button [SET +] button
[MENU] button
VTR mode 2 setting
VTR MODE 1 VTR MODE 2
NORMAL
(SUMMER TIME)
OFF
(TAERMINAL SEL 1)
NORMAL
(TAERMINAL SEL 2)
REPEAT
(REC REMAIN)
OFF
OFF
OFF
OFF
PRESS (SHIFT, SET)
TO END PRESS (MENU)
• Select an item with the [SHIFT +/-] buttons.
• Enter the selected values with the [SET +/-] buttons.
6
The VTR mode 1, VTR mode 2 and alarm/sensor
recording mode setting screens include several menu
switches.
Press the [SHIFT +] or [SHIFT –] button to select the
item you want to set.
• When the cursor arrow reaches the last item (bottom of the
screen) pressing the [SHIFT +] button advances the
display to the next menu switch setting screen.
e.g.: (WARNING BUZZER)
• When the cursor arrow is at the first item (top of the
screen), pressing the [SHIFT -] button will change the
display to the previous menu switch setting screen.
e.g.: (SHARPNESS)
7
Press the [SET +] or [SET –] button to enter the selected
value.
To set more than one menu switch, repeat steps
6 and 7.
8
End menu switch setting.
Press the [MENU] button twice.
[ The normal screen is restored.
• Set values are stored in the VCR's memory. This
data is retained even when the power is turned off.
RESET
/CANCEL
AL/PL
RESET
Alarm/sensor recording
mode setting
A LARM / SENSOR REC MODE
OFF
(ALARM REC)
SERIES
(SENSOR REC)
WARN
(REC MODE)
OFF
(DURATION)
(BUZZER)
(TAPE END MODE)
PRESS (SHIFT, SET)
TO END
[
(SUMMER TIME)
[
(POSITION)
OFF
OFF
2H
180SEC
OFF
STOP
19