Disp & Audio Setup
Operating Modes
Operating modes allows you to turn the TouchCenter chime mode on
or off. Additionally, you may also turn the voice mode on or off. The
operating modes provide the following features:
• Chime Mode – When selected, a request is sent to the alarm panel
requesting that the panel chime the TouchCenter whenever a
change in zone status occurs.
• Voice Mode – When selected, a request is sent to the alarm panel
requesting that the panel initiate TouchCenter voice annunciation
whenever a change in system status occurs such as Armed,
Disarmed, or Alarms.
• Voice Chime – The chime mode and voice mode are in effect with
the chime followed by voice annunciation.
Access the "Display and Audio Setup" screen as follows:
1. From the "Home" screen, press the Setup button.
SCREEN
Setup (Cont'd)
ACTION
1. The "Setup" screen is displayed.
2. Press the Disp&Audio Setup button.
If enabled, the "User Authorization"
screen is displayed with the instructions
"Enter Authorized Code"
3. Enter your "Authorized Code". The
"Display and Audio Setup" screen is
displayed.
4. Touch the Chime Mode button to turn
the Chime Mode on or off. A checkmark
appears in the button when the Chime
Mode is "ON". Note that it may take a few
seconds for the Chime Mode to take
effect.
37