Solving Problems - Uniden UDW20553 User Manual

If you have any trouble with your system, try these simple steps first. If you still have a question, call
our Customer Care Line listed on the front cover.
If...
The image on the
display is too bright.
The image on the
display is too dim.
Part of the image is
cut off.
The image on my TV
is too bright/dark.
The image does not
fit my TV screen.
The display is
completely blank.
The display just
says No Signal.
The image on the
screen is frozen.
None of the buttons
on the receiver or
the remote respond
when I press them.
22

Solving Problems

Try..
- Adjusting the brightness on the receiver (in the system setup sub-menu).
- Moving the camera's sun shield forward over the lens.
- Adjusting the brightness on the receiver (in the system setup sub-menu).
- Making sure the camera is at the right distance for low-light conditions.
- Moving the camera's sun shield back away from the lens.
- Checking the camera path for any obstacles.
- Adjusting the brightness on your television. (The receiver brightness setting
does not affect the television.)
- Changing the TV out setting on the receiver (in the system setup sub-
menu).
- Making sure the AV output cable is not connected.
- Making sure the USB cable is not connected.
- Making sure the receiver is plugged in.
- Switching to a different camera. (If the receiver is in quad display mode and
the cameras are not working, the screen could be blank.)
- Resetting the receiver.
- Switching to a different channel.
- Checking the channel status icon to see which channel the receiver is on.
Make sure the camera assigned to this channel is powered on.
- Re-pair the camera to the receiver.
- Resetting the camera.
- Resetting the receiver.
- Resetting the receiver.