Configure The Internet Camera - TRENDnet TV-IP110 - SecurView Internet Surveillance Camera Quick Installation Manual

3. Configure the Internet Camera

Note:
1. It is recommended that you configure the Internet Camera from a wired
computer.
2. If you would like to use SecurView software, please refer to the User's Guide
on the CD for more information.
1. Insert the Utility CD-ROM into your
CD-ROM drive and then click IP
Setup.
2. Follow the Installation Wizard
instructions and then click Close.
3. Go to Start -> Programs ->
TRENDnet -> IPSetup and click
IPSetup.
Note: By default, the IP setting on the TV-IP110/TV-IP110W is set to DHCP.
Please skip to step 8. If you want to give the TV-IP110/TV-IP110W static IP
address, continue on to step 4.
4. Select the Internet Camera and
click Change IP.
4
English