Advertisement
3. Configure the Internet Camera
Note:
1. It is recommended that you configure the IP Camera from a wired computer.
2. If you would like to use SecurView software, please refer to the User's Guide
on the CD for more information.
1. Insert the Utility CD-ROM into your
CD-ROM drive and then click
IP Setup.
2. Follow the Installation Wizard
instructions and then click Close.
3. Go to Start -> Programs ->
TRENDnet -> IPSetup and click
IPSetup.
Note: By default, the IP setting on the TV-IP121W is set to DHCP. Please
skip to step 8. If you want to give the TV-IP121W a static IP address, continue
on to step 4.
4
English
Advertisement
