setup screen
Video analysis
1.
From the Setup menu, select the
<Event (
2.
Click <Video analysis>.
To set the Motion Detection
1.
Select a motion detection mode.
2.
Specify the use of motion detection.
3.
Select a sensitivity level of the motion
detection.
4.
Place the cursor at a point in the video
and drag it to whatever you need.
You can specify up to 4 motion detection
areas.
5.
Specify the activation time and
activation condition.
For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 49)
6.
When done, click [Apply (
50_ setup screen
)> tab.
)].