Video Analysis - Samsung SNV-5080 User Manual

video analysis

1.
From the Setup menu, select the
<event ( )> tab.
2. Click <video analysis>.
3.
Specify the use of Intelligent Video
Analysis.
4.
Specify the use of overlay.
If you set it to Enable, the event rules
will be shown on the screen.
5.
Select a sensitivity level at which the
camera detects the object.
6.
Specify the object size.
7.
Select an event rule.
You can select a total of 3 rules including the
virtual line and the specified area.
8.
Specify the activation time and activation
condition.
For more information about <Activation
time> and <Action>, refer to "Alarm Input".
(page 84)
9.
Specify whether or not the alarm area is displayed.
- If you set it to <on>, the suspect area where the alarm occurs will be marked in a
red box.
To use the iv analysis function according to the virtual line based rule
1. Set <iv analysis function> to
<enable>.
2. Set the event rule to <virtual line based
rules>.
3.
Click a desired area in the video and
drag it to the end point, and right-click it.
4. Select a desired <virtual Line rules>.
You can specify up to 3 event rules for the virtual line.
Right : A movement from left to right in the virtual line will be detected.

Left : A movement from right to left in the virtual line will be detected.

Both : A movement in any direction in the virtual line will be detected.

English _