Table of Contents
Advertisement
setup screen
Video analysis
1.
From the Setup menu, select the
<Event (
2.
Click <Video analysis>.
3.
Specify the use of Intelligent function.
4.
Set the resolution value and sensitivity
level to detect an object.
Resolution Value
1
2
3
4
5
If you set the Resolution Value high, the
camera can detect detail motion of the object.
5.
Set the Motion Detection type.
Sets to detect and trace the moving object.
Tracking : Detects a moving object and perform additional functions.
Detection : Detects a moving object.
6.
Set whether to use the Additional Motion Functions or not.
Detects any motion of an object, displays the video with any changes, and trace the
moving path.
If you select the <Moved/Fixed>, you can display the corresponding area when
an object disappears from the screen or an object appears and stays in the
screen for a specifi ed time period.
7.
Set whether to use the Motion Display function or not.
8.
Set the activation time and condition.
Refer to the "Alarm input 1 ~ 8" for how to set the <Activation time> and <Action>. (page 81)
9.
After set the <On> to the <Intelligence function> set up the <Mask Area>.
You can specify up to 4 masking areas. Click on the screen and drag it to a desired
point. This will set the masking area. Motion detection is not activated in set mask
area.
To delete set area, click [Delete (
M
Do not change the <Flip mode> setting under <Video Setup> after setting the masking area.
If you change the <Flip mode> setting after setting the masking area, delete all existing masking
areas and set them again.
82_ setup screen
)> tab.
Object Size
32 of 8x8 pixel
24 of 8x8 pixel
16 of 8x8 pixel
8 of 8x8 pixel
1 of 8x8 pixel
)] button.
Advertisement
Table of Contents
